Basic Info.
Surface Treatment
Painted
Range of Applications
Power station, Industrial
Water Recharge Rate %
100
Working Temperature ºC
104
Working Pressure MPa
0.02
Design Pressure MPa
0.098
Transport Package
Marine Transport
Product Description
Sponge iron deaerators for wastewater treatment
Product Description
I.Overview:
With the progress of science and technology and the improvement of safety awareness, higher requirements are put forward for the safety of boiler use. The use of vacuum deoxygenating equipment provides safety guarantee and more choices for the development of electric power industry. Our company has conducted in-depth research and development in vacuum deoxygenation.
It has the following advantages. (1).The vacuum deoxygenator can not only remove oxygen in water, but also remove carbon dioxide and other gases in water.
(2).No steam is consumed during deoxygenation, and the boiler output is fully utilized;
(3).It is used to deoxidize the make-up water when there is no surplus steam in the hot water heating boiler room;
(4)stable operation, high vacuum degree and convenient operation.
(5)The time from startup to normal operation is fast, and the deoxygenation effect remains unchanged when the load changes within the range of 0-120%;
(6) The salt content and other impurities in the deoxygenated water will not increase; (7)low installation, which is convenient for single-layer layout of small boiler room and saves investment;
(8) Model 8)MCYZ is an integrated assembly equipment with strong integrity, small floor space and convenient installation. After the equipment is in place, the water outlet pipe is connected well and can be put into operation after being connected to the power supply. II.component
The vacuum deoxygenator is composed of deoxygenator head, deoxygenator water tank, vacuum extractor and vacuum water pump, etc. It can be installed at a low position and used for deoxygenating feed water of steam boiler, deoxygenating feed water of hot water heating boiler and other systems that need to remove gas from water. 1.Deaerator head: The vacuum deaerator works at a pressure lower than the atmospheric pressure, and the inlet water temperature is 45 ~ 60 C. The softened water is sent to the inlet nozzle of the deaerator head by the deaerator feed pump, and the water is atomized under the inlet water pressure and sprayed into the deaerator tower. Because the atomized water droplets have a large surface area, it is conducive to the separation and escape of gas, thus achieving the purpose of deaerating. When the deoxygenated water continues to flow downwards, it contacts with the lower packing layer and forms a water film, which improves the deoxygenation effect. 2.Deaerating water tank: The water in the deaerating water tank is at its saturation pressure, and part of the water in the boiling state is evaporated, and the gas remaining in the water is pumped away by the exhaust pipe, and the deaerating process is completed again. Finally, the deoxygenated water is stored in the water tank.
3.Vacuum pumping device: In the vacuum deoxygenation system, a certain degree of vacuum is maintained in the deaerator, and the gas dissolved in water and uncondensed steam escaping with the gas are pumped out. The vacuum pumping device is a key component, which is mainly composed of a circulating water pump, a water jet vacuum pump (water jet air extractor) and a circulating water pump. Circulating water is supplied by tap water, and its water temperature should be 6-10"C lower than that of demineralized water of deaerator.
4.oxygen tank water level automatic control device In order to ensure the safe operation of the deaerator under normal working conditions, the deaerator water tank is equipped with an automatic water level control device. The device mainly consists of a liquid level gauge and a sensor, and automatically gives an alarm when the water level exceeds the maximum or minimum water level limit.The model consists of two parts: Chinese phonetic alphabet and (treatment water volume T/H); For example, jscyz-50T/H represents a vacuum deaerator with a treatment water volume of 50t/h.III.Operation requirements
1.Cleaning of equipment: flushing the vacuum deaerator, deaeration water tank and circulating water tank. The deaerator should be discharged regularly and the water level should be monitored.
2.Water intake: inject water into the deoxygenated water tank and circulating water tank, and the deoxygenated water tank is filled with softened water; The circulating water tank is supplied with softened water for the first time, and the subsequent supplementary water source can be raw water (tap water). Deaerator drain valve and sewage valve should be tight. Continuous water supply shall be ensured for desalted water, and the water supply pressure shall be between 0.2 and 0.4 MPa. 3.All measuring meters shall be complete and accurate. Especially, the water level indicator of deaerator should be accurate. Each regulating control valve on the water side should be able to effectively regulate the water pressure and flow.4.Each drain tank and pump should be in good condition and can be put into operation at any time.
IV.Inspection of vacuum deaerator before starting.
1, make sure that the maintenance work is completed, the water tank flushing is qualified, and the water has been drained. 2, out of the water gate, sewage gate shall be closed. 3, Doors for condensation, drainage and desalting water shall be closed.. 4, the test automatically adjust the door switch is flexible, and put it in the fully open position. 5.Test whether the switch of the automatic adjusting door is flexible and put it in the fully open position.. 6, water level gauge is complete, clean, up and down cock open, water cock closed. 7.All kinds of meters are complete, and the pressure gauge is opened. V. Startup of deaerator: 1, open the water inlet system into the vacuum deaerator head. 2, put into operation the vacuum pumping system, start the circulating water pump to keep the pressure in the container at about -0.095~-0.088Mpa and the water temperature at 40~50ºC, when the water level gauge in the container reaches 2/3 height. The water inlet valve can be fully opened to supply water to the feed pump. 3, according to the oxygen content, adjust the vacuum VI.Deaerator stop
1, Slowly close the valves for desalting water, draining water and condensed water, open the vacuum breaker, and stop the circulating water pump when the vacuum is zero. 2, Close the water outlet and pay attention to the water level.. 3. Whether to release water according to the production notice. If the water is drained, open the drain door to drain the water, and then close it after the water is drained.
4.Several common problemsWhen the vacuum degree does not reach the specified value; First, check whether there is air leakage at the flange joints, and check whether the fastening screws are tightened. If there is looseness, please tighten them in time. As long as there is any air leakage in each connection, it will cause air to enter, and the vacuum degree of deaerator will not reach the specified value. Check the working state of the pump and see whether the water outlet, flow rate and pressure are normal; If not, adjust it. Check the working state of the water sprayer and see whether the water sprayer is blocked, clean it in time if it is. Detailed Photos
Product Parameters
| Item/model | JSCY-10 type (low pressure) | JSCY-20 type (low pressure) | JSCY-40 type (low pressure) | JSCY-50 type (low pressure) | JSCY-70 type (low pressure) | JSCY-130 type (low pressure) | JSCY-150 type (low pressure) | JSCY-200 type (low pressure) | JSCY-350 type (low pressure) | JSCY-220 type(high pressure) | JSCY-420 type(high pressure) | JSCY-440 type(high pressure) | JSCY-680 type(high pressure) |
| Rated output t/h | 10 | 20 | 40 | 50 | 75 | 130 | 150 | 200 | 350 | 220 | 420 | 440 | 680 |
| Effective volume m³ | 5 | 10 | 20 | 22 | 25(30) | 40 | 40 | 40 | 70 | 70 | 100 | 100 | 140 |
| Design pressure MPa | 0.098 | 0.098 | 0.098 | 0.098 | 0.098 | 0.098 | 0.098 | 0.098 | 0.098 | 0.65 | 0.65 | 0.65 | 0.89 |
| Design temperature °C | 250 | 250 | 250 | 250 | 250 | 250 | 250 | 250 | 250 | 300 | 330 | 330 | 400 |
| Working pressure MPa | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | 0.49 | 0.49 | 0.49 | 0.49 |
| Working temperature ºC | 104 | 104 | 104 | 104 | 104 | 104 | 104 | 104 | 104 | 158 | 158 | 158 | 158 |
| Inlet water temperature ºC | >10(Deaerator) | >10(Deaerator) | >10(Deaerator) | >10(Deaerator) | >10(Deaerator) | >10(Deaerator) | >10(Deaerator) | >10(Deaerator) | >10(Deaerator) | Set by working condition | Set by working condition | Set by working condition | Set by working condition |
| Water recharge rate % | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | | | | |
| Deaerator diameter mm | 812 | 812 | 1212 | 1412 | 1412 | 1616 | 1616 | 1816 | 2016 | 2024 | 2228 | 2228 | 2640 |
| Deaerator height mm | 2730 | 2730 | 2860 | 2860 | 2913 | 3015 | 2965 | 3015 | 3085 | 3302 | 3356 | 3356 | 3422 |
Company Profile
Lianyungang Jiusheng Electric Power Auxiliary Machinery Co., Ltd.
a national high-tech enterprise, is located at the foot of Jinping Mountain and beside the Qiangwei River. The factory is located in Lianyungang City, Jiangsu Province, the intersection of the the Belt and Road, and the east bridgehead of the Eurasian Continental Bridge.
It is adjacent to the 5A scenic spot of Huaguo Mountain and Liu Zhizhou Sports Park.
It is 5 kilometers away from the entrance and exit of the expressway, 13 kilometers away from the airport, and 36 kilometers away from the port.
It has convenient transportation by land, sea and air.
The company was founded in 2012 with a registered capital of 51 million yuan and an area of 20,000 square meters. It has 6 standardized industrial plants, supporting office areas, living quarters and finished goods yards, with a building area of about 11,000 square meters.
Our Advantages
Jiusheng Company has honed a sword for ten years, casting the soul of the enterprise with the spirit of craftsman.
Under the careful creation of Chairman Xie Qizhi, it has grown into a well-known enterprise in the domestic power auxiliary machinery industry.
It integrates the design, production and sales of electric auxiliary machinery, pressure vessels, chemical equipment and pipeline engineering installation services.
It has the qualification of designing & manufacturing
D1 and D2 level pressure vessel , and the qualificaton of GB2 and GC2 pipeline engineering installation.
It passedISO9001 international quality system,ISO14001 environmental health management system, ISO45001 occupational health management system certification in the industry, and also owns Madrid international trademark and product import and export qualification.
It has certain manufacturing experience in American standard and European standard pressure vessels and other products and has been recognized as a qualified supplier by more than 10 central enterprises in the industry, including CNNC, Sinopec, PetroChina, Huadian, Huaneng, China Resources, China Railway, China Energy Construction, China Power Construction, Guoneng, Everbright, etc.
Address:
No. 18, Xinba Middle Road, Industrial Park, Jinping Town, Lianyungang, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Chemicals, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
The company was established in 2012 with a registered capital of 51 million yuan and covers an area of 25 acres. It has 6 standardized industrial plants and supporting office areas, living areas and finished goods yard, with a construction area of about 10, 000 square meters. Jiusheng company has been sharpening a sword in ten years, casting the soul of the enterprise with the spirit of craftsmanship. Under the careful construction of the chairman Mr. Xie Qizhi, it has grown into a power auxiliary equipment enterprise in Gangcheng. She integrates the design, production and sales of power auxiliary equipment, pressure vessels, chemical equipment and pipeline engineering installation services. It is the chairman unit of Lianyungang Power Auxiliary Equipment Industry Association. Has the design and manufacture of D1, D2 pressure vessels, GB2, GC2 pipeline engineering installation qualifications, passed the ISO9001 quality system certification and ISO14001 environmental health management system certification, ISO45001 occupational health management system certification in the industry, by China National Nuclear Corporation, Sinopec, PetroChina, Huadian, Huaneng, China Resources, China Railway, China Energy Construction, China Power Construction, National Energy, Everbright and other more than 10 central enterprises in the industry were recognized as qualified suppliers, and the company was listed in the Jiangsu Equity Exchange Center in 2018.
Since its establishment, the company has successfully developed new structures such as "special muffler for nuclear power units", "composite steam muffler", "multi-pipe fan muffler", "self-cleaning industrial water filter", "magnetic filter", "Air filter", "Low-consumption high-efficiency water jet air extractor", "Energy-saving deaerator", "High-efficiency waste heat recovery device", "Tubular oil cooler", "Intelligent rubber ball cleaning device", "Fully automatic" More than 20 series and hundreds of specifications of electric power environmental protection and energy saving equipment such as "dosing device". The company has been committed to technological innovation and product research and development, and has obtained nearly 40 product patents, including 4 invention patents. A variety of products have been recognized as national high-tech products, such as "deaerator exhaust steam waste heat recovery device", "water jet air extractor", "silencer", "water filter" and so on. The company has perfect production inspection standards, and all new products have passed the quality inspection of "Jiangsu Provincial Product Quality Inspection and Supervision Center"
){kind=link}